Achieving High Active Material Loading for Co- and Ni-free cathodes for Lithium-Ion Batteries Through Conductive Network Integration

Abstract: 

Disordered rocksalt (DRX) cathodes could enable high-capacity, cobalt- and nickel-free lithium-ion batteries, but their poor electronic conductivity has required high carbon contents and intensive mechanical processing, sacrificing electrode-level energy density. Here we report a solution-based electrostatic self-assembly approach that uniformly decorates polyethylenimine-modified Li1.05Mn0.85Ti0.10O2 particles with multiwalled carbon nanotubes (CNTs). The high-aspect-ratio CNT network provides electrode-level electronic percolation at < 3 wt% total carbon. Electrodes with < 3 wt% CNT match conventional electrodes containing 20 wt% carbon black while increasing the active-material mass fraction up to > 95%. This low-inactive-content architecture delivers ~500 Wh kg−1 electrode-level specific energy, compared with ~370 Wh kg−1 for carbon-rich electrodes, and remains effective at active-material loadings up to ~56 mg cm−2 and areal capacities of ~8.5 mAh cm−2. The high active-material electrode architecture also delivers a high electrode-level energy density of ~2098.8 Wh L-1, which is comparable to the conventional layered oxides. These results establish conductive-network engineering as a practical route to high-loading DRX cathodes.

Author: 
Venkata Sai Avvaru
Tucker Holstun
Joseph Vazquez Mercado
Yanbao Fu
Bernardine L.D. Rinkel
Seonghun Jeong
Finn Babbe
Haegyeom Kim
Harshita Lohani
Andrea Giunto
Subhadip Mallick
Vincent Battaglia
Bryan D McCloskey
Qingsong Howard Tu
Gerbrand Ceder
Publication date: 
August 24, 2026
Publication type: 
Preprint